樹脂 Resin | 溫度Temp℃ | 結果 Result | 醇酸 。ˋlkyd) | 60 | 不變色(No Discoloration) | 60--80 | 輕微失色,嚴重失光(Slight Discoloration Severe Loss of Gloss | 80--150 | 嚴重變色(Severe Discoloration) | > 150 | 開裂(Breakdown) | 環氧 。‥poxy) | 60 | 不變色(No Discoloration) | 60--80 | 輕微失光變色(Slight Discoloration and Coos of Gloss) | 80--125 | 嚴重變色(Severe Discoloration) | > 200 | 開裂(Breakdown) | 環氧云鐵涂料 。‥poxy Mlo)
| 80 | 不變色(No Discoloration) | 80--100 | 輕微變色(Slight Discoloration) | 100--150 | 嚴重變色(Severe Discoloration) | > 150 | 開裂(Breakdown) | 丙烯酸聚氨酯 。ˋcrylic Polyyurethane) | 80 | 不變色(No Discoloration) | 80--100 | 輕微失光變色Slight Discoloration and Coos of Gloss) | 100--125 | 嚴重變色(Severe Discoloration) | > 200 | 開裂(Breakdown) | 環氧瀝青 (Coal Tar Epoxy)
| 60 | 不變色(No Discoloration) | 60--80 | 輕微變色,完全失光(Slight Discoloration and Complete Loss of Gloss) | 80--150 | 嚴重變色(Severe Discoloration) | > 200 | 開裂(Breakdown) | 氯化橡膠(Chloinated Rubber) | 60 | 不變色,輕微失光(No Discoloration and Complete loss of Gloss) | 80--100 | 嚴重變色失光(Severe Discoloration and Loss Glos | > 100 | 開裂(Breakdown) |
環境: 最高溫度≤80℃ Environment:Maximum Operating Temp≤80℃ 體系: 雙組份環氧 System: Two Pack Epoxy Paints 表面處理: 噴砂達Sa2.5 Surface Preparation: Blast Clean to Sa2.5 品種 Coatings | 干膜厚度dft,μm | 理論用量 Throretical Consumprion kg/m2 | WH 環氧云鐵涂料 WH Epoxy MIO | 50 | 0.12 | WH-40 環氧面涂 WH-40 Epoxy Finish | 50 | 0.13 | | Total DFT:100 | | 環境: 最高溫度≤200℃ Environment:Maximum Operating Temp≤200℃ 體系: 無機富鋅/有機硅 System: Zinc Silicate/Polysiloxane 表面處理: 噴砂達Sa2.5 Surface Preparation: Blast Clean to Sa2.5 品種 Coatings | 干膜厚度 dft,um | 理論用量 Throretical Consumprion kg/m2 | WE 厚膜型無機富鋅涂料 WE High-Build Zinc Silicate Primer | 75 | 0.35 | 5200耐高溫涂料 (鋁粉色) 5200 Heat-Resisting Coating Aluminum | 40 | 0.12 | | Total DFT:115 | | 環境: 最高溫度≤200℃ Environment:Maximum Operating Temp≤200℃ 體系: 有機硅 System:Polysiloxane 表面處理: 噴砂達Sa2.5 Surface Preparation: Blast Clean to Sa2.5 品種Coatings | 干膜厚度 dft,um | 理論用量 Throretical Consumprion kg/m2 | 5200耐高溫涂料 (鋁粉色) 5200Heat-ResistingCoatingAluminum | 40 | 0.12 | 5200耐高溫涂料 (鋁粉色) 5200 Heat-Resisting Coating Aluminum | 40 | 0.12 | | Total DFT:80 | | 環境: 最高溫度≤300℃ Environment:Maximum Operating Temp≤300℃ 體系: 無機富鋅/有機硅 System: Zinc Silicate/Polysiloxan 表面處理: 噴砂達Sa2.5 Surface Preparation: Blast Clean to Sa2.5 品種Coatings | 干膜厚度 dft,um | 理論用量 Throretical Consumprion kg/m2 | WE 厚膜型無機富鋅涂料 WE High-BuildZinc Silicate Primer | 75 | 0.35 | 5300耐高溫涂料 (鋁粉色) 5300 Heat-Resisting Coating Aluminum | 40 | 0.14 | | Total DFT:115 | |
環境 : 最高溫度≤600℃ Environment:Maximum Operating Temp≤600℃ 體系: 有機硅 System:Polysiloxane 表面處理: 噴砂達Sa2.5 Surface Preparation: Blast Clean to Sa2.5
品種 Coatings | 干膜厚度dft,um | 理論用量 Throretical Consumprion kg/m2 | 5600耐高溫涂料 (鋁粉色) 5600Heat-ResistingCoating Aluminum | 40 | 0.15 | 5600耐高溫涂料 (鋁粉色) 5600 Heat-Resisting Coating Aluminum | 40 | 0.15 | | Total DFT:80 | | |